dwc_otg_host_if Struct Reference

OTG Host Interface Structure. More...

#include <dwc_otg_regs.h>


Data Fields

dwc_otg_host_global_regs_thost_global_regs
 Host Global Registers starting at offset 400h.
volatile uint32_t * hprt0
 Host Port 0 Control and Status Register.
dwc_otg_hc_regs_thc_regs [MAX_EPS_CHANNELS]
 Host Channel Specific Registers at offsets 500h-5FCh.
uint8_t num_host_channels
 Number of Host Channels (range: 1-16).
uint8_t perio_eps_supported
 Periodic EPs supported (0: no, 1: yes).
uint16_t perio_tx_fifo_size
 Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO).


Detailed Description

OTG Host Interface Structure.

The OTG Host Interface Structure structure contains information needed to manage the DWC_otg controller acting in host mode. It represents the programming view of the host-specific aspects of the controller.

Definition at line 2181 of file dwc_otg_regs.h.


The documentation for this struct was generated from the following file:
Generated on Tue May 5 02:22:49 2009 for DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver by  doxygen 1.4.7