These vector files are designed for laser cutting from sheet material.

Copyright (c) Alex Lee 2012 (AlexLeeRPi@gmail.com) CERN OHL v. 1.1.
See file LICENSE for more information

Vector files are provided in both inkscape SVG format (with example component layout layer hidden by default) and Enhanced Postscript (eps) for importing to Adobe Illustrator
If importing to Illustrator, run the "Release Compound Paths" menu option  before cutting

File list:

chassis_servo_full
	Contains all the parts for the chassis - best to copy parts onto separate sheets for each material
	Cutting order:
	Red: Cut 3mm red acrylic
	Green: Etch
	Blue: Cut 3mm red acrylic
	Black: Cut 4mm Nylon
	Magenta: Cut 3mm clear acrlic

clear_acrylic
	Contains the parts to be cut from 3mm clear acrylic
	Cutting order:
	Green: Etch
	Blue: Cut 3mm clear acrylic

red_acrylic
	Contains the parts to be cut from 3mm red acrylic
	Cutting order:
	Red: Cut 3mm red acrylic
	Green: Etch
	Blue: Cut 3mm red acrylic

Pi_clips
	Contains the nylon clips to secure the Raspberry Pi to the Chassis
	NB Nylon cuts very badly on the lase cutter
	For best results cut clips a single pair at a time (see Pi_clips2) to avoid the whole sheet heating up too much
	Cut in two passes with a pause between to allow the sheet to cool
	Remove clips while still warm to avoid the cut welding together again as the sheet cools
