VNCviewer for X (3.3.3 onwards)
Note: this page documents the Xt-based viewer in the 3.3.3 release. For
previous releases, see the documentation for the
old Xlib-based viewer.
If you just run the viewer from the command line, it will prompt you for a VNC
server to connect to:
Alternatively, specify the VNC server as an argument, e.g.:
where 'snoopy' is the name of the machine, and '2' is the display number of the
VNC server on that machine. Either the machine name or display number can be
omitted. So for example ":1" means display number 1 on the same machine, and
"snoopy" means "snoopy:0" i.e. display 0 on machine "snoopy".
If the VNC server is successfully contacted, you will be prompted for a
password to authenticate you. If the password is correct, a window will appear
showing the desktop of the VNC server.
The viewer has a popup window containing a set of buttons which perform various
actions. It is usually brought up by pressing F8, but this is customisable, as
is the entire contents of the popup. Actions which buttons in the popup window
can perform include:
By default, key presses in the popup window get sent to the VNC server and
dismiss the popup. So to get an F8 through to the VNC server simply press it
- switching in and out of full-screen mode
- quitting the viewer
- generating arbitrary key and mouse events, e.g. sending ctrl-alt-del
- transferring the clipboard to or from the VNC server
See the section on customisation below for how to customise the contents of the
Full screen mode
A full-screen mode is supported. This is particularly useful when connecting
to a remote screen which is the same size as your local one. If the remote
screen is bigger, you can scroll by bumping the mouse against the edge of the
Unfortunately this mode doesn't work completely with all window managers, since
it breaks all the X window management conventions. It tends to work better
when the viewer is started in full-screen mode than when switching to it from
Command line options
You can get a list of options by giving -h as an option to vncviewer.
Most of these options can also be specified as X resources - see the section
on customisation below.
When you make a connection to a VNC server, all other existing connections are
normally closed. This option requests that they be left open, allowing you to
share the desktop with someone already using it.
- -display Xdisplay
Specifies the X display on which the VNC viewer window should appear.
- -passwd password-file
If you are on a filesystem which gives you access to the password file used by
the server, you can specify it here to avoid typing it in. It will usually be
Specifies that no keyboard or mouse events should be sent to the server.
Useful if you want to view a desktop without interfering; often needs to be
combined with -shared.
Start in full-screen mode.
- -geometry geometry
Standard X position and sizing specification.
Tells the VNC server to send pixels which are only 8 bits deep. If your server
desktop is deeper than this then it will translate the pixels before sending
them. Less data will generally be sent over then network, which can be a big
advantage on slow links, but the server may have to work a bit harder, and you
may get some colour mismatches. "BGR233" means an 8-bit true colour pixel
format, with the most significant two bits of each byte representing the blue
component, the next three bits representing green and the least significant
three representing red. This format is also used by the java client.
- -encodings encodings
This option specifies a list of encodings to use in order of preference,
separated by spaces. The default is "copyrect hextile corre rre", or "raw
copyrect hextile corre rre" for a VNC server on the same machine. For example,
to use only raw and CopyRect, specify "raw copyrect".
Try to use a PseudoColor visual and a private colormap - this allows the VNC
server to control the colormap.
Try to use a TrueColor visual.
- -depth d
This is only useful on a (real) X server which supports multiple TrueColor
depths. On such a display vncviewer will try to find a Visual of the given
depth. If successful this means that the appropriate pixel format will be
requested from the VNC server. You cannot use this to force a particular depth
from the VNC server. The only option which does this is -bgr233.
Causes vncviewer to listen on port 5500+<display-number> for reverse
connections from a VNC server. WinVNC supports reverse connections initiated
using the 'Add New Client' menu option or the '-connect' command-line option.
Xvnc now supports reverse connections with a helper program called vncconnect. It is also used for our internal
version of VNC - see
Customisation and X resources
The behaviour of vncviewer is extremely customisable using X resources. You
can set X resources by any of the usual means - in an app-defaults file such as
.Xresources, or on the command line with the '-xrm' option. See the X window
system documentation for details.
The application resources are:
- shareDesktop (option -shared)
Whether to leave other viewers connected. Default false.
- viewOnly (option -viewonly)
Block mouse and keyboard events. Default false.
- fullScreen (option -fullscreen)
Full screen mode. Default false.
- passwordFile (option -passwd)
File from which to get the password (as generated by the vncpasswd
program). Default is null, i.e. to request password from the user.
Whether to use a dialog box to get the password (true) or get it from the
tty (false). Irrelevant if passwordFile is set. Default false.
- encodings (option -encodings)
A list of encodings to use in order of preference, separated by spaces.
Default is null, which actually means "copyrect hextile corre rre", or "raw
copyrect hextile corre rre" for a VNC server on the same machine.
- useBGR233 (option -bgr233)
Always use the BGR233 (8-bit) pixel format on the wire, regardless of the
visual. Default is false (though BGR233 is used anyway for non-TrueColor
visuals with forceOwnCmap false).
When using BGR233, try to allocate this many "exact" colours from the
BGR233 colour cube. When using a shared colormap, setting this resource
lower leaves more colours for other X clients. Irrelevant when using
truecolour. Default is 256 (i.e. all of them).
If the number of "exact" BGR233 colours successfully allocated is less than
256 then the rest are filled in using the "nearest" colours available.
This resource says whether to only use the "exact" BGR233 colours for this
purpose, or whether to use other clients' "shared" colours as well.
Default true (i.e. use other clients' colours).
- forceOwnCmap (option -owncmap)
Try to use a PseudoColor visual and a private colormap - this allows the
VNC server to control the colormap. Default false.
- forceTrueColour (option -truecolour)
Try to use a TrueColor visual. Default false.
- requestedDepth (option -depth)
If forceTrueColour is true, try to use a visual of this depth. Default 0
(i.e. any depth).
Whether to use the MIT shared memory extension if on the same machine as
the X server. Default true.
The total width and height taken up by window manager decorations. This is
used to calculate the maximum size of the VNC viewer window. Default is
width 4, height 24.
When in full screen mode and the VNC desktop is bigger than the X display,
scrolling happens whenever the mouse hits the edge of the screen. The
maximum speed of scrolling is bumpScrollPixels pixels every bumpScrollTime
milliseconds. The actual speed of scrolling will be slower than this, of
course, depending on how fast your machine is. Default 20 pixels every 25
The number of buttons in the popup window. See below for how to customise
This is useful for debugging VNC servers by checking exactly which parts of
the screen are being updated. For each update rectangle vncviewer puts up
a black rectangle for the given time in milliseconds before putting up the
pixel data. This only highlights pixel data sent using the raw encoding.
Default 0 (i.e. don't do it).
Similar to rawDelay, but highlights the areas copied using the copyrect
How to customise the popup window
Set the number of buttons with the popupButtonCount resource, e.g.:
For each button, set the label, and override the button press translations,
*popup*button1.label: Left mouse button click at 100,100
*popup*button2.label: Send "Think thin!"
How to customise the desktop window
You can override translations on the desktop window. For example to change the
key used to bring up to popup window from F8 to Escape, and make F12 switch in
and out of full screen mode:
These are the actions which you can use in translations:
Show and hide the popup window, respectively.
Send an RFB event to the VNC server. With no argument, simply sends the
RFB equivalent of the X event which caused the action. With arguments,
generates either key or pointer events depending on the arguments:
- SendRFBEvent(key,keysym) (short for keydown followed by keyup)
- keysym is the string representing an X keysym. The best way to find these
is to use "xev", or look in /usr/include/X11/keysymdef.h and strip off the
- x and y are the position of the pointer event. If not specified,
use the position of the X event which caused the action.
- buttonMask is a bit mask representing buttons 1 to 8 with bits 0 to 7
respectively, 0 meaning up, 1 meaning down (pressed). So 0 means no buttons, 1
means button 1 pressed, 5 means buttons 1 & 3 pressed, etc.
Send the local X selection or cut buffer to the VNC server. This is
usually invoked when the mouse enters the viewer window. With no argument
or an argument "new", this is only done if this is a "new" selection,
i.e. it hasn't already been sent. With an argument "always", it is sent
Set the local X selection and cut buffer to the current value of the VNC
server "cut text". This is usually invoked when the mouse leaves the
viewer window. With no argument or an argument "new", this is only done if
there has been new "cut text" since the last time it was called. With an
argument "always", it is set each time.
Quit the VNC viewer.
Pause for a given number of milliseconds (100 by default). This is
sometimes useful to space out events generated by SendRFBEvent.
Toggle in and out of full screen mode.
Sets the "state" resource of a toggle widget to reflect whether we're in
full screen mode.
Used to tell the dialog boxes that entry has finished. Usually invoked by
the return key.
For the real experts amongst you, here is the widget hierarchy used by vncviewer in case you want to change the resources of the widgets.
Server dialog box:
Password dialog box: